Custom Nameplate for Kennels: Order and Mount It Right

By RuffLand® Performance Kennels | Published: 2026-11-03

Category: Návody

Learn how to order a custom kennel nameplate with the right artwork and mount it securely so your dog's ID stays readable and attached.

Quick answer

Order a custom kennel nameplate by uploading a sharp, correctly sized image, then mount it on a flat, clean surface where it won't be rubbed or chewed. The key is preparing artwork at 300 DPI and 2.5" × 5.5" before you start.

Why artwork resolution matters more than the photo itself

A nameplate is small, so any blur or pixelation in your image becomes obvious when printed. The Custom Nameplate is 5.5 inches wide by 2.5 inches tall, and artwork should be supplied at 300 DPI sized to those exact dimensions (750 × 375 pixels). If your photo is lower resolution, it may look soft or jagged after printing, even if it looks fine on your phone screen.

Where a kennel nameplate actually belongs

Mount the plate where it is easy to read from outside the kennel but protected from paws, bedding, and door swing. A flat panel on the front or side of the kennel usually works better than a curved or moving part. Avoid placing it where a latch, hinge, or tie-down bracket will rub against it, and keep it out of reach of a determined chewer.

Steps to order and mount your kennel nameplate

Choose a clear, high-contrast photo: Pick an image where your dog's face or the text you want is the main subject. A busy background can make a small nameplate hard to read. Common mistake: using a dark photo that prints as a muddy blur.
Resize and export at 300 DPI: Crop your image to a 5.5:2.5 ratio (for example, 750 × 375 pixels) and export at 300 DPI. Check the file at 100% zoom before uploading. Checkpoint: if the image looks soft at full size, choose a sharper original.
Upload and preview the nameplate: Use the Custom Nameplate's upload step to add your background image, then review the preview for cropping or cut-off details. Common mistake: skipping the preview and discovering later that the dog's ears or name were trimmed.
Pick a flat mounting spot: Test-fit the plate on the kennel before attaching anything. Choose a flat area away from latches, hinges, and high-traffic chewing zones. Checkpoint: the plate should sit flush without rocking or bending.
Clean and dry the surface: Wipe the mounting area with a damp cloth and let it dry completely. Dust, oil, or moisture can weaken adhesives or trap grit behind the plate. Common mistake: mounting on a wet or dirty surface and finding the plate loose days later.
Attach with the method your kennel allows: Use the fastening method recommended for your kennel's material—adhesive for smooth panels, or screws/rivets only where the manufacturer permits drilling. Do not drill into load-bearing or coated parts without checking. Checkpoint: give the plate a gentle tug to confirm it is secure.
Do a weekly security check: After the first week, and then periodically, press on the plate and look for loosening, rust, or chewing damage. Reattach or replace it before it becomes a hazard. Common mistake: assuming a new plate will stay tight forever without a quick check.

Product facts

Custom Nameplate: The Custom Nameplate measures 5.5" wide by 2.5" tall and accepts a photo background. That fixed size tells you exactly how to prepare your image before ordering, so the printed result stays sharp.
Custom Nameplate